China wholesaler Carbon Stainless Steel Alloy Motor Marine Idler Timing Roller and Transmission Chains with Gear Sprockets for Industrial Conveyor Machinery Parts

Product Description

BASIC INFO.
 

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CHINAMFG resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

 

INSTALLATION AND USING

The chain wheel, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 
 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

motor chain

Can a motor chain be used in environments with high temperatures or humidity?

Yes, motor chains can be used in environments with high temperatures or humidity, but certain considerations need to be taken into account.

High Temperatures:

When operating in high-temperature environments, it is important to choose a motor chain that can withstand the elevated temperatures. Special heat-resistant materials, such as heat-treated steel or alloys, are often used for the construction of chains intended for high-temperature applications. These materials have superior heat resistance and can maintain their strength and performance even at elevated temperatures.

In addition to selecting the appropriate chain material, proper lubrication becomes even more critical in high-temperature environments. The lubricant used should have a high temperature rating to ensure adequate lubrication and prevent premature wear. Regular monitoring of the chain’s condition and lubrication levels is essential to maintain its performance and minimize the effects of heat.

Humidity:

In humid environments, the risk of corrosion and rust formation on the motor chain increases. To address this, corrosion-resistant materials and coatings are commonly used for motor chains. Stainless steel chains or chains with special corrosion-resistant coatings provide better protection against moisture and humidity.

Proper maintenance and lubrication are also crucial in humid environments to prevent moisture from penetrating the chain and causing corrosion. Regular inspections, cleaning, and lubrication with corrosion-inhibiting lubricants can help extend the lifespan of the chain and maintain its performance.

It is important to note that while motor chains can be used in high-temperature or humid environments, their performance and lifespan can still be affected. It is recommended to consult the chain manufacturer for specific guidelines and recommendations regarding the use of motor chains in such conditions. Additionally, proper ventilation and environmental controls should be considered to minimize the impact of high temperatures or humidity on the chain’s performance.

motor chain

What are the main components of a motor chain?

A motor chain consists of several key components that work together to transmit power and motion. Here are the main components:

1. Plates: The plates are the main load-bearing components of the chain. They are typically flat, metal pieces that are interconnected to form a continuous loop. The plates provide the strength and rigidity required to handle the torque and tension applied during operation.

2. Pins: The pins serve as the pivot points for connecting the plates. They are cylindrical metal rods that pass through the holes in the plates, holding them together while allowing them to rotate freely. The pins are securely pressed or riveted into the plates.

3. Bushings: The bushings are cylindrical sleeves that are inserted into the holes of the plates. They provide a bearing surface for the pins, reducing friction and wear. The bushings also help maintain proper spacing and alignment between the plates.

4. Rollers: Some motor chains, particularly roller chains, feature rollers that are positioned between the plates. The rollers provide smooth and low-friction engagement with the sprockets, allowing the chain to smoothly transmit power and motion.

5. Rivets: The rivets are used to secure the ends of the chain together, forming a continuous loop. They are typically cylindrical metal pins that are peened or pressed to permanently join the chain ends.

6. Side Plates: The side plates enclose the sides of the chain and provide additional support and protection. They help prevent the chain from derailing and also serve as a mounting point for attaching the chain to the sprockets or other components.

Together, these components form a durable and reliable motor chain that is capable of transmitting power and motion efficiently in various applications. The specific design and configuration of the components may vary depending on the type and size of the motor chain.

motor chain

How do you select the right motor chain for a specific motor?

When selecting a motor chain for a specific motor, there are several factors to consider. Here is a step-by-step guide:

1. Determine the motor specifications: Start by understanding the motor’s power rating, speed, and torque requirements. This information will help you choose a motor chain that can handle the motor’s power output and torque demands.

2. Identify the application requirements: Consider the specific application in which the motor will be used. Determine if the motor will be subjected to high loads, high speeds, or harsh environmental conditions. This will help you select a motor chain that is suitable for the application’s demands.

3. Determine the chain type: Motor chains come in various types, including roller chains, silent chains, bush chains, and more. Each chain type has its own characteristics and performance capabilities. Select a chain type that aligns with the requirements of the motor and application.

4. Calculate the chain size: Determine the required chain size based on the motor’s power and torque requirements. Consider factors such as pitch size, roller diameter, and number of chain links. Manufacturers typically provide chain size charts or calculation tools to assist in selecting the right chain size.

5. Consider the environmental factors: Take into account the environmental conditions in which the motor will operate. If the motor is exposed to moisture, chemicals, high temperatures, or other harsh elements, choose a motor chain with appropriate corrosion resistance, temperature resistance, and durability.

6. Consult manufacturer recommendations: Consult the motor manufacturer’s recommendations or specifications to identify any specific requirements or restrictions for motor chains. They may provide guidance on compatible chain types, lubrication requirements, and maintenance recommendations.

7. Evaluate cost and availability: Consider the cost and availability of the selected motor chain. Evaluate factors such as initial cost, maintenance requirements, and the availability of spare parts or replacements.

By considering these factors and conducting thorough research, you can select the right motor chain that matches the motor’s specifications, application requirements, and environmental conditions. It is recommended to consult with motor and chain manufacturers or industry experts for further guidance and assistance.

China wholesaler Carbon Stainless Steel Alloy Motor Marine Idler Timing Roller and Transmission Chains with Gear Sprockets for Industrial Conveyor Machinery Parts  China wholesaler Carbon Stainless Steel Alloy Motor Marine Idler Timing Roller and Transmission Chains with Gear Sprockets for Industrial Conveyor Machinery Parts
editor by CX 2023-12-07

Tags: alloy roller chains | carbon steel roller chains | chains | chains and conveyor | chains conveyor | chains conveyor chains | chains conveyor conveyor | chains conveyor motor | chains conveyor parts | chains conveyor roller | chains conveyor sprockets | chains for conveyor | chains gear | chains motor conveyor | chains roller | chains roller chains | chains roller conveyor | chains roller gear motor | chains roller motor | chains transmission | china chains | china chains conveyor | china chains roller conveyor | china conveyor chains | china conveyor roller chains | china industrial roller chains | china machinery | china motor | china roller chains | china roller chains conveyor | china roller conveyor chains | china stainless steel chains conveyor | china stainless steel conveyor chains | china steel conveyor chains | conveyor chains | conveyor chains and sprockets | conveyor chains parts | conveyor chains roller | conveyor chains sprockets | conveyor motor | conveyor roller chains | gear | gear and chains | gear chains | gear for motor | gear machinery | gear motor | gear parts | gear transmission | gear with motor | idler roller chains | idler sprockets roller chains | industrial chains | industrial chains and sprockets | industrial chains conveyor | industrial chains roller | industrial conveyor chains | industrial gear | industrial gear motor | industrial machinery | industrial motor | industrial roller chains | industrial sprockets | industrial sprockets for roller chains | industrial transmission conveyor roller chains | machinery | machinery china | machinery for | machinery machinery | machinery parts | marine motor | motor | motor and gear | motor chains | motor motor | motor parts | parts for motor | parts gear | Roller Chains | roller chains alloy | roller chains and sprockets | roller chains chains | roller chains conveyor | roller chains conveyor chains | roller chains conveyor parts | roller chains for conveyor | roller chains gear | roller chains idler | roller chains parts | roller chains sprockets | roller chains stainless steel | roller chains transmission | roller conveyor chains | roller conveyor chains sprockets | roller gear | roller motor | roller sprockets chains | roller steel chains | roller timing chains | roller with chains | sprockets chains | sprockets for conveyor chains | sprockets for roller chains | sprockets roller chains | stainless conveyor chains | stainless roller chains | stainless roller chains parts | stainless roller chains sprockets | stainless steel chains | stainless steel chains conveyor | stainless steel conveyor chains | stainless steel conveyor roller chains | stainless steel roller chains | stainless steel roller chains conveyor chains | stainless steel sprockets | steel alloy gear | steel chains | steel chains conveyor | steel conveyor chains | steel conveyor chains roller | steel roller chains | steel roller conveyor chains | timing chains | timing gear | transmission chains | transmission gear | transmission roller chains